A.I.M. Controls has a wide variety of motors available for our customers through Fincor.
A.C. Motors
1/4 - 250 HP, TEFC, Rigid Base, General Purpose
Rigid Base
TEFC Design
NEMA B Design
2:1 Constant Torque Speed Range
Cast Iron Frames 256T and Up
1/4 - 250 HP, Drip Proof, Rigid Base, General Purpose
Drip Proof Design
Rigid Base
NEMA B Design
2:1 Constant Torque Speed Range
Cast Iron Frames 256T and Up
1/4 - 20 HP, C-Face, General Purpose
C Face Mount
NEMA B Design
2:1 Constant Torque Speed Range
TEFC and ODP
A.C. Motors - Inverter Duty
1/3 - 10 HP, Inverter Duty, TENV
Inverter Duty Over Wide Speed Range
C-Face and Foot Mount
Cast Iron Ribbed Frame
Two Normally Closed 155 Celsius Thermal Protectors Wound Between Phase
Class H Insulation
Fully Phase Insulated
Regreasable Bearings
Encoders Available on 143TC Frames and Up
NEMA B Design
230/460 Volt Windings
2 - 200 HP, Inverter Duty, TEBC
Inverter Duty Over Wide Speed Range
C-Face and Foot Mount
Cast Iron Ribbed Frame
Two Normally Closed 155 Celsius Thermal Protectors Wound Between Phase
Class H Insulation
Fully Phase Insulated
Regreasable Bearings
Encoders Available on 143TC Frames and Up
NEMA B Design
230/460 Volt Windings
Blue Max Inverter Duty Variable Torque XRI Premium Efficiency
Three Phase AC Induction Motor, Totally Enclosed, Rigid Base
STANDARD DUTY FEATURES
Two year warranty
Cast Iron frame and brackets
Totally Enclosed, Fan Cooled
Variable torque operation to base speed
Suitable for 1.5 x base speed constant HP (subject to mechanical limits)
Design B, suitablef or by-pass mode
1.0 Service Factor (Class F) on PWM power
1.15 Service Factor (Class B) on sine wave
UL recognized and CSA certified
Continuous duty, 40C
Ball bearing, except where noted
Actual test data and vibration data supplied
SEVERE DUTY ADDITIONAL FEATURES
Internal surfaces treated with corrosion resistant epoxy paint
All cast iron construction
Lead separator
Threaded conduit box
UL approved brass drain and breather
Extended grease inlets with zerk fittings
External epoxy paint
Cast iron inner bearing caps (254-449 frame)
D.C. Motors
1/6 - 5 HP, Permanent Magnet
For use with Single-Phase Adjustable Speed DC Motor Controllers
Wide Constant Torque Speed Range
NEMA Type K Design
Removable Base
UL Listed
CSA Certified
1/6 - 5 HP, Shunt-Wound
Wide Constant Torque Speed Range
TEFC & Dripproof Enclosure
NEMA Type K Design
Removable Base
UL Listed
CSA Certified
1 - 1000 HP, Integral HP
For use with Static Adjustable Speed DC Converters
Heavy Duty Industrial
Shunt or Stabilized Shunt
Open or Enclosed Frames